Plenty of people have been asking about how they can get the best possible speed from their broadband connection. This page will help you learn more about how to do that, using as little “tech speak” as possible, hopefully allowing you to improve your internet speed.
Tips For Best Broadband Connection
This article assumes you’re using a normal exchange phone line for Broadband Connection service, regardless of the ISP (Internet Service Provider) you use. Let’s go to the tips.
Avoid Switching Off Router
Once your router is set up correctly, avoid switching it off. If it happens to go off by accident – such as during a power cut – make sure to check the speed once it’s on again.
Know Metrics of Router
There are two key metrics about your router you should always pay attention to Exchange synchronization speed and data download speed. Always keep an eye on these and make sure they’re at maximum.
Check Synchronization Speed
Synchronization speed tends to be around 20% to 30% higher than the download speed. This happens because synchronization speed includes all the bits passed between the exchange and the router so they can communicate.
Download speed, on the other hand, measures the speed at which data reaches the computer once the overhead bits necessary for router/exchange communication are removed. Basically, download speed determines how quickly data gets transferred to your computer.
It can be hard to get a read of synchronization speed on certain routers, so take a look at the router’s set up the screen in order to see if that information is readily available.
Measure Download Speed
The best way to measure download speed is by using visiting the BT Wholesale Speed Test page. Once you’re at the website, simply follow the on-screen instructions.
Check Upload Speed
Along with download speed, the many speed test websites available online will provide you with information on your upload speed – typically around 15% of your download speed.
It also informs you about your ping latency, which refers to the time in milliseconds it takes for a bit of data to get from your PC to the internet server and then return. You can get the cheapest broadband from uSave as they compare all deals.
Manage Synchronization Speed
Synchronization speed is set dynamically by your exchange. It varies according to the distance between you and the exchange, and the signal to noise ratio for your particular line. The further away you are the slower the speed you’ll get, as distance decreases signal strength and increases the noise level.
If the wire that connects you to the exchange is longer than 4km, your speed will likely be very slow (under 2 Mbps). Please note that this doesn’t refer to the actual distance from the exchange in a straight line, as cables often take circuitous routes that significantly increase the distance to the exchange. You can find more information on this topic at http://www.bbc.co.uk/news/technology-10774406
Manage Download Speed
Download speed is managed by an algorithm in your exchange equipment which adjusts synchronization speed in response to breaks in the Broadband Connection or data errors on the line (that is the reason why you should always leave the router on if possible.
Some routers can read disconnections or errors on your online – such as loss of link, loss of signal, error seconds, along with HEC, CRC and FEC errors. Signal loss and errors can all be corrected by the algorithm, but error seconds (intervals of seconds in which errors have occurred), will cause it to reduce synchronization speed, and thus download speed as well.
Rate This Article